Eftersom det är alldeles omöjligt att få tag på 1 5/8" 0.95 kromemollyrör i Sverige så åkte jag över till min vän och mekaniker Jim i Olympia nu i påsk för att hämta lite, priserna var inte så mycket billigare därborta men det går att få tag på rören i alla fall, här är de slut, känns lite som Afrika!
Since it is quite impossible to get your 1 5/8 "0.95 cromemollytube in Sweden so I went over to my friend and mechanic Jim in Olympia now in Easter to get some, the prices were not that much cheaper over there but you can get hold of the tubes anyway, here is the end, feels a bit like Africa!
måndag 21 april 2014
onsdag 16 april 2014
Kåpglas-Ingvar är klar
2 nya kåpglas hämtade jag i dag, ett för mulet väder och ett för solsken, inte var han dyr heller.
2 new windscreen I picked today, one for overcast weather and one for sunshine, was not that expensive either.
2 new windscreen I picked today, one for overcast weather and one for sunshine, was not that expensive either.
lördag 5 april 2014
Vevskivshål
Rolle fixade nytt hål till den strokade 645cc motorn, gammelhålet till vevstaken är det översta hålet.
Rolle drilled new holes for the 645cc engine, the old hole for the connecting rod is the top hole.
Rolle drilled new holes for the 645cc engine, the old hole for the connecting rod is the top hole.
Stötstänger
Köpte lite ämnen till stötstänger, dels krommollyrör och duralaluminiumstång, vi vägde dom för att se vilken som var lättast, ingen vann, det var samma vikt så det blir aluminium tror jag.
Bought some substances to pushrods, chrome molly tubes and dural aluminum rod, we weighed them to see which one was the heaviest, no one won, it was the same weight, so it will be aluminum I think.
Bought some substances to pushrods, chrome molly tubes and dural aluminum rod, we weighed them to see which one was the heaviest, no one won, it was the same weight, so it will be aluminum I think.
Lättspeedway 1957
En bild på Kjell tagen i Värmland 1957, 2 år innan jag föddes, ingen hjälm inte ens en mössa.
Annars så gläds vi i dag åt att Tyskland äntligen har fått fram en speedwayåkare av klass, Martin Smolinsky körde om de andra helt utan respekt, tyskland behöver verkligen en arvtagare efter Egon Müller, den gamla rocksångaren som vann VM 1983.
A picture of Kjell taken in Värmland in 1957, two years before I was born, no helmet not even a hat.
Otherwise, we rejoice in the day to Germany finally has produced a speedway riders of the class, Martin Smolinsky drove on the other with no respect, germany really need an heir after Egon Müller, the rock singer who won the World Cup in 1983.
Annars så gläds vi i dag åt att Tyskland äntligen har fått fram en speedwayåkare av klass, Martin Smolinsky körde om de andra helt utan respekt, tyskland behöver verkligen en arvtagare efter Egon Müller, den gamla rocksångaren som vann VM 1983.
A picture of Kjell taken in Värmland in 1957, two years before I was born, no helmet not even a hat.
Otherwise, we rejoice in the day to Germany finally has produced a speedway riders of the class, Martin Smolinsky drove on the other with no respect, germany really need an heir after Egon Müller, the rock singer who won the World Cup in 1983.
Satans ligister
I dag skulle jag hjälpa Mats med sin Yamaha som förlorat tändningen, efter en del grubblande så upptäckte vi att någon klippt bort CDI-boxen, inte undra på att tändningen strejkade.
Today I would help Mats with his Yamaha who lost ignition, after some pondering, we discovered that someone cut off the CDI box, no wonder that the ignition did not work.
Den här hittade jag på internet, inte på Mats Yamaha 350TT från 1984.
This I found on the internet, not on Mats Yamaha 350TT 1984
Today I would help Mats with his Yamaha who lost ignition, after some pondering, we discovered that someone cut off the CDI box, no wonder that the ignition did not work.
Den här hittade jag på internet, inte på Mats Yamaha 350TT från 1984.
This I found on the internet, not on Mats Yamaha 350TT 1984
fredag 4 april 2014
Bromsen är lagad
I kväll svängde jag in till Hans Bergman och fick min Laverdabroms lagad, skönt att slippa leta något annant fult hantag.
In the evening I went out to Hans Bergman and got my Laverda brake welded, good to avoid having to buy new.
In the evening I went out to Hans Bergman and got my Laverda brake welded, good to avoid having to buy new.
Prenumerera på:
Inlägg (Atom)
